Quick Links. Table of Contents. Previous Page. Next Page. Page 3: Part 1 Getting Acquainted This part of the manual provides you with important information you need to know in order to use the Label Printer to its full potential. Be sure to read it carefully before using the Label Printer for the first time.
Function key Letter keys Tape Cutter Operation Precaution Note the following important precautions when operating the tape cutter lever.
When operating the tape cutter lever, make sure you do not press it too hard. Using a wrong adaptor can damage your Label Printer.
Close the tape cartridge compartment cover. When the caps mode indicator is not shown on the display, all letters are input as lower-case. Auto feed is in effect when this indicator is not on the display.
Use the H and J cursor keys to move the underlining to the symbol you want. The menu will scroll when you press the cursor keys. You cannot make multiple specifications for specific characters. Page Stamp Printing 3. When auto feed is on, the Label Printer automatically feeds the tape about 12mm at the beginning and end of each print operation. This creates identical margins on both sides of your text. Replacing the Tape Cutter Blade The tape cutter blade is designed to provide approximately 3, cuts.
To load a tape cartridge Tape Width Specification To specify 6mm tape width Display Symbols and Indicators Basic Alpha-Numeric Input To input alpha-numeric characters About the CODE key… Special Symbols To input special symbols Moving the Cursor To move the cursor Deleting Individual Characters To delete characters using the BS key To delete characters using the DEL key Clearing the Display To clear the display Text Editing To insert new characters To change existing characters to different ones Character Size To change the character size Text Effects To specify a text effect Part 6 Printing Printing a Tape To print a tape Stamp Printing To print a stamp tape Mirror Image Printing To turn mirror image printing on and off Other Printing Features and Operations Auto Feed To turn auto feed on and off To manually feed tape Print Density To adjust the print density Part 7 Memory To store data To recall text from memory To delete text from memory Part 8 Reference Replacing the Tape Cutter Blade To replace the tape cutter blade Cleaning the Printer Head and Roller To clean the printer head and roller Initial Power On Settings Initializing the Label Printer To initialize the Label Printer Part 1 Getting Acquainted.
This part of the manual provides you with important information you need to know in order to use the Label Printer to its full potential. Be sure to read it carefully before using the Label Printer for the first time.
Keep your fingers away from this cartridge and be especially careful to keep the cartridge away from small children. Doing so can damage the cutter blade. Doing so can damage the Label Printer. Use a soft, dry cloth or a cloth dampened in a weak solution of a mild, neutral detergent and water.
Wring the cloth out until all excess moisture is removed. When this happens, clean off the printer head by wiping it with a cotton swab moistened with alcohol page Always return the tape cutter lever by hand back to its original position after the tape is cut.
Label Printer operation is designed to be as simple as possible, thanks to onscreen menus that you can use to select the settings you need. Each menu is described in detail in the sections that follow in this manual, but note the following general points when using them. Part 2 Getting Ready. This part of the manual tells you how to load batteries and the tape cartridge, and how to perform other basic setups for the Label Printer.
A handy low battery power indicator lets you know when battery power is getting too low for proper operation. You should still be able to perform some Label Printer operations, but some power intensive operations like printing may become impossible if battery power is too low. Batteries can burst or leak and damage your unit if you do not use them correctly.
0コメント